Arial
Wingdings
Monotype Sorts
Symbol
Acrobat PDFWriter
etter
winspool
LPT1:
Basic frame around drawing.
utomatically snaps to page size. Move corner control handles to limits of print margins.
Vis_TMH.chm!#24818 `7Copyright 1999 Visio Corporation. All rights reserved.
Resize Bottom/Left Margin
Resize Top/Right Margin
Rectangle.
with text and connection points. Can be stretched to any dimensions.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_Sba.chm!#22430
Dimensions
Horizontal dimension line with variable dimension line & text positions.
itions.
Vis_TMH.chm!#24764 `7Copyright 1999 Visio Corporation. All rights reserved.
`1Choose the displayed precision for the dimension. Precision
`#Choose the units for the dimension. Units Use Drawing Page's Units;.Feet-Inch (1'-0"");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
`4Choose whether or not to display unit abbreviations. Units Display Don't Show Units;Show Units
Both `)Choose which extension lines are visible. Extension Lines ` Both;End only;Begin only;Neither
`8Choose the angle at which the dimension line is rotated.
Precision && Units... `?Choose unit and precision settings for the displayed dimension. Prop.LPrec.Invisible
Set As Page Default `HSet this shape's precision and unit options as the default for the page. ThePage!User.LPrec Prop.LPrec User.LPrecVal ThePage!User.LUnits Prop.LUnits User.LUnitsVal ThePage!User.ShowUnits Prop.ShowUnits User.ShowUnitsVal
Revert To Page Default `SSet this shape so that it uses the default precision and unit settings of the page. Prop.LPrec User.LPrecVal Prop.LUnits User.LUnitsVal Prop.ShowUnits User.ShowUnitsVal
_Reset Text Position `-Move dimension text to it's default location. Controls.X2 Scratch.X1 Controls.Y2 Height
Extension Lines... `)Choose which extension lines are visible. Prop.LPrec.Invisible
Change Dimension Height
Reposition Text
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
0.00
Use Drawing Page's Units
Don't Show Units
1.00
esc(0)
`.0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
`"Linear Precision Formatting String
`#0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Horizontal dimension line with text outside extensions with variable dimension line & text positions.
xt position.
Vis_TMH.chm!#24763 `7Copyright 1999 Visio Corporation. All rights reserved.
0.50
Vertical dimension line with variable dimension line height & text positions.
Vis_TMH.chm!#24767 `7Copyright 1999 Visio Corporation. All rights reserved.
Q(-DT `8Choose the angle at which the dimension line is rotated. Q(-DT
3-D box with variable depth and orientation.
Use control handle or horizontal/vertical flips to change orientation.
ctive.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_Sba.chm!#22432
Adjust Depth and Orientation
`7Copyright 1999 Visio Corporation. All rights reserved.
Variable dimension angle, extension line cut-off, dimension line location, & text position.
ition.
Vis_TMH.chm!#24779 `7Copyright 1999 Visio Corporation. All rights reserved.
0;0DEG;0DEG;0DEG0MIN0SEC;0RAD
`#Angular Precision Formatting String
`$0=Dwg, 1=°, 2=deg, 3=° ' "", 4 = rad
Change Dimension Angle
Resize Dimension
Change Extension Line Length
Precision && Units... `?Choose unit and precision settings for the displayed dimension. Prop.APrec.Invisible
Set As Page Default `HSet this shape's precision and unit options as the default for the page. ThePage!User.APrec Prop.APrec User.APrecVal ThePage!User.AUnits Prop.AUnits User.AUnitsVal
Revert To Page Default `SSet this shape so that it uses the default precision and unit settings of the page. Prop.APrec User.APrecVal Prop.AUnits User.AUnitsVal
_Reset Text Position `-Move dimension text to it's default location. Controls.X2 Connections.X1 Controls.Y2 Connections.Y1
Extension Lines... `)Choose which extension lines are visible. Prop.APrec.Invisible
`#Choose the units for the dimension. Units `[Use Drawing Page's Units;Degrees (10.5°);Degrees (10.5deg);Deg-Min-Sec (10°15°20"");Radians
Both `)Choose which extension lines are visible. Extension Lines `2Both;1st extension only;2nd extension only;Neither
esc(2)
0=Dwg, 1=°, 2=deg, 3=° ' ", 4 = rad
0.0\°
90.0°
0.0
Use Drawing Page's Units;Degrees (10.5°);Degrees (10.5deg);Deg-Min-Sec (10°15°20");Radians
Degrees (10.5°)
0DEG
Select shape and type angle in degrees. Right-click hides/shows text & eccentricity handle.
& handle.
o an ellipse.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24798
Change Curvature
Actions.Action Hide Handle/Text Show Handle/Text `1Hide or show the shape's control handle and text.
Scratch.C1 Show Complementary Arc `'Show the complement of the current arc.
Controls.Y1 Width Reset To Circular Arc `4Reset the arc to be circular rather than elliptical.
Hide Handle/Text
Use handles to adjust arc size and orientation. Right-click for complementary arc.
ry arc.
entary arc.
arc.
llipse.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24795
Resize Arc
Actions.Action Show Complementary Arc `'Show the complement of the current arc.
Textbox with field label on top and field below. Field automatically reflects drawing's scale.
Vis_TMH.chm!#24835 `7Copyright 1999 Visio Corporation. All rights reserved.
0 = top-bottom, 1 = side-side
User.BoxType Height Height Label Above Label At Left `KConfigure the shape so that the label is above or to the left of the field.
Label At Left
0.#### u
Textbox with field label on top and field below. Field automatically reflects drawing's title information.
dialog box.
Vis_TMH.chm!#24836 `7Copyright 1999 Visio Corporation. All rights reserved.
@+
Deck Hardware
Text block with centered text. Use as a header/label for a section of a parts list, revisions block, or title block.
tle block.
Annotate.hlp!#3213 `9Copyright © 1997 Visio Corporation. All rights reserved.
Textbox with field label on top and field below. Field automatically reflects foreground drawing's page number.
Vis_TMH.chm!#24833 `7Copyright 1999 Visio Corporation. All rights reserved.
0.####
Textbox with field label on top and field below. Field automatically reflects drawing's creator information.
Vis_TMH.chm!#24830 `7Copyright 1999 Visio Corporation. All rights reserved.
jstander
Textbox with field label on top and field below. Field automatically reflects drawing's creation date.
Vis_TMH.chm!#24828 `7Copyright 1999 Visio Corporation. All rights reserved.
ddddd
Textbox with field label on left and field on right. Select and type to edit field.
Double-click to edit field label.
Vis_TMH.chm!#24826 `7Copyright 1999 Visio Corporation. All rights reserved.
User.BoxType Label Above Label At Left `KConfigure the shape so that the label is above or to the left of the field.
Label Above
Side View of Harken Winch
Ask On Drop `8To display the custom properties of the shape upon drop. TRUE
"
Side view of hexagonal jam nut. Selection box height represents thread diameter.
?xwwwww
Vis_TME.chm!#25924 `7Copyright 1999 Visio Corporation. All rights reserved.
User.Sizing Prop.ParHeight Prop.Diameter Height User.Diameter Width User.ParHeight Set Dimensions... `"Input individual shape dimensions.
_Resize With Handles Use shape handles to resize. User.Sizing Prop.Diameter Height Prop.ParHeight Width
_Show Hidden Detail _Hide Hidden Detail `$Show or hide hidden detail in shape. User.Detail
Input thread diameter. Diameter
Input nut thickness. Thickness
_Resize With Handles
_Hide Hidden Detail
Side view of raised countersunk slotted screw with adjustable thread length.
Vis_TME.chm!#25934 `7Copyright 1999 Visio Corporation. All rights reserved.
Thread Length
?@wwwwww Reposition Text
Input thread diameter. Thread Diameter
Input shaft length. Shaft Length
Input threaded length. Thread Length
Min. bolt length
Min. thread length
width height
Controls.X1 Controls.X1 `DLimit rangle of movement of control handle to with width-height box.
Custom thread diameter.
Custom bolt length.
Custom thread length.
Text block control handle.
Choose resizing mode.
Anti-scaling formula.
Set Dimensions... `"Input individual shape dimensions. User.Sizing Prop.Diameter Prop.Length Prop.ThreadLen Height User.Diameter Width User.Length Controls.X1 User.ThreadLen
_Resize With Handles Use shape handles to resize. User.Sizing Prop.Diameter Height Prop.Length Width Prop.ThreadLen Controls.X1
Notations
Handle controls width of text box, height sizes with text.
paragraph width/word-wrap.
ragraph width.
graph width.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24701
Show Box Hide Box Show or hide box around text. Geometry2.NoShow
Show Box
Side view of countersunk slotted screw with adjustable thread length.
Vis_TME.chm!#25931 `7Copyright 1999 Visio Corporation. All rights reserved.
Side view of hexagonal nut. Selection box height represents thread diameter.
meter.
Vis_TME.chm!#25918 `7Copyright 1999 Visio Corporation. All rights reserved.
Washer or spacer with adjustable inside and outside diameters.
`9Copyright © 1997 Visio Corporation. All rights reserved. Mecheng.hlp!#4038
Set Dimensions... `"Input individual shape dimensions. User.Sizing Prop.Diam Prop.Diam2 Prop.Tk Height User.Diam Width User.Width Controls.Y1 User.DM
_Resize With Handles Use shape handles to resize. User.Sizing Prop.Diam Height*User.Doff Prop.Diam2 (Controls.Y1-Height/2)*2 Prop.Tk Width
User.Detail _Show Hidden Detail _Hide Hidden Detail `$Show or hide hidden detail in shape.
Resize Outside Diameter
`:Input diameter of bolt around which washer will be placed. Inside Diameter
Input outside diameter. Outside Diameter
Thickness Input washer thickness.
Controls.Y1
Single-coil washer with adjustable inside and outside diameters.
Vertical dimension line with text outside extensions with variable dimension line & text positions.
Vis_TMH.chm!#24766 `7Copyright 1999 Visio Corporation. All rights reserved.
Generic circle with text and connection points.
on points.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_Sba.chm!#22426
Aluminum Channel
mecheng.hlp!#6107 `;Copyright (C) 1997 Visio Corporation. All rights reserved.
ALCH
Change Dimensions... Edit MechLIB Part
Slotted Nut
mecheng.hlp!#6104 `;Copyright (C) 1997 Visio Corporation. All rights reserved.
NTSL
Annotate.hlp!#3204 `9Copyright © 1997 Visio Corporation. All rights reserved.
Press Tab before each text field to match division spacing .
t. Press Tab before each text field to match division spacing .
Annotate.hlp!#3211 `9Copyright © 1997 Visio Corporation. All rights reserved.
Change Column Spacing
Automatically reads out the scale of the page.
annotate.hlp!#4022 `9Copyright © 1997 Visio Corporation. All rights reserved.
Architectural `1Choose the display style for the drawing's scale. User.ScaleType
Civil User.ScaleType
Mechanical User.ScaleType
Metric User.ScaleType
12/1"
1
1'-0"
12"
1in
Mechanical 1 : 1
Architectural 12" = 1'-0"
Civil 1in = 1in
Metric 1 : 1
Choose the display style for the drawing's scale.
:
`9Copyright © 1997 Visio Corporation. All rights reserved. Annotate.hlp!#3202
t & handle.
ipse.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24797
Show Complementary Sector Scratch.C1 `*Show the complement of the current sector.
Reset To Circular Sector Controls.Y1 Width `7Reset the sector to be circular rather than elliptical.
Circle defined by diameter. Adjustable eccentricity allows for ellipse.
to an ellipse.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24789
Controls.Y1 Width/2 Reset To Circular `!Reset the ellipse to be circular.
Circle or ellipse with connection points and text that stays level when shape is rotated.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24788
Place endpoint at arc center, control handle on arc. Right-click to hide/show cross-hairs.
f arc.
f the arc.
Vis_TMH.chm!#24774 `7Copyright 1999 Visio Corporation. All rights reserved.
Place on Arc
_Hide Crosshair _Show Crosshair Hide or show the crosshair. Scratch.D1
Hide Crosshair
Hide the crosshair.
_Hide Crosshair
0.25
0
mension.
Vis_TMH.chm!#24772 `7Copyright 1999 Visio Corporation. All rights reserved.
Prop.LPrec User.LPrecVal Prop.LUnits User.LUnitsVal Prop.ShowUnits User.ShowUnitsVal Revert To Page Default `SSet this shape so that it uses the default precision and unit settings of the page.
Scratch.D1 _Hide Crosshair _Show Crosshair Hide or show the crosshair.
esc(4)
Centerline.
handles to change length of centerlines.
Scratch.A1 changes size of middle crosshair.
Vis_TMH.chm!#24786 `7Copyright 1999 Visio Corporation. All rights reserved.
Harken 2114 Footblock Front View
PUUUUU
@PUUUUU
Rectangle with connection points and text that stays level when shape is rotated.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24811
Harken 2114 Footblock Side View
Place 1-D endpoints on baseline & 1st feature, up to 4 vertical baseline dimensions.
up to 4 vertical baseline dimensions.
Vis_TMH.chm!#24765 `7Copyright 1999 Visio Corporation. All rights reserved.
Reposition 2nd Dimension Line
Reposition 3rd Dimension Line
Reposition 4th Dimension Line
Change Line Spacing
P(-DT
Aligned dimension with equal length extensions and variable dimension line & text positions.
sitions.
& text positions.
Vis_TMH.chm!#24770 `7Copyright 1999 Visio Corporation. All rights reserved.
Harken 2114 Footblock Top View
Control handles vary section line lengths. Bottom arrow can be shown or hidden.
Vis_TMH.chm!#24712 `7Copyright 1999 Visio Corporation. All rights reserved.
Reposition Line End
Actions.Action Show Bottom Arrow Hide Bottom Arrow Show the bottom arrow. Hide the bottom arrow.
Hide Bottom Arrow
Hide the bottom arrow.
Use to indicate a reference plane.
general reference plane extremity markers.
Double-click to hide/show markers.
rker.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24714
User.ShowEnds Show Top Only Show top bubble only.
User.ShowEnds Show Bottom Only Show bottom bubble only.
User.ShowEnds Show Both Ends Show top and bottom bubbles.
Use to indicate an omitted portion of a lengthy feature.
ontrol handle adjusts zigzag size.
t width to increase white-out block size.
Vis_TMH.chm!#24711 `7Copyright 1999 Visio Corporation. All rights reserved.
Resize Break
Vis_TMH.chm!#24713 `7Copyright 1999 Visio Corporation. All rights reserved.
Actions.Action Show Bottom Arrow Hide Bottom Arrow Hide or show the bottom arrow.
Move control handle to change bend location.
Vis_TMH.chm!#24700 `7Copyright 1999 Visio Corporation. All rights reserved.
Reposition Bend
Show or hide box around text. Geometry2.NoShow Show Box Hide Box
Copy & paste special characters from shape, or refer to this note for codes:
=Alt+0177,
=Alt+0216,
=Alt+0176.
nformation.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24787
Rectangle with variable corner rounding.
f corners on rectangle.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_Sba.chm!#22433
Adjust Corner Rounding
Side view of hexagonal socket bolt with adjustable thread length.
Vis_TME.chm!#25919 `7Copyright 1999 Visio Corporation. All rights reserved.
Input bolt shaft length. Shaft Length
`!Show or hide shape hidden detail.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TME.chm!#25966
Side view of hexagonal head bolt with adjustable thread length.
Vis_TME.chm!#25916 `7Copyright 1999 Visio Corporation. All rights reserved.
Controls.X1 Controls.X1 `?Limit rangle of movement of control handle to width-height box.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TME.chm!#25964
Variable dimension angle, dimension line location, & text position. Extensions end at angle-specifying handles.
ndles.
Vis_TMH.chm!#24778 `7Copyright 1999 Visio Corporation. All rights reserved.
Place 1-D endpoints on baseline & 1st feature, up to 4 horizontal baseline dimensions.
to 4 horizontal baseline dimensions.
TUUUUU
Vis_TMH.chm!#24762 `7Copyright 1999 Visio Corporation. All rights reserved.
?VUUUUU
Vis_TMH.chm!#24776 `7Copyright 1999 Visio Corporation. All rights reserved.
Place On Circle
Box callout with adjustable box size. Drag endpoints to aim callout.
eight.
o identify component.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24704
Resize Width
Resize Height
Harken 627 5000# SWL
`#Reposition Lower-Left of Crosshairs
@fffffæÓ?@HDDDDD `$Reposition Upper-Right of Crosshairs
Hex Head Bolt
HEXB
Side view of countersunk posidriv screw with adjustable thread length.
Vis_TME.chm!#25940 `7Copyright 1999 Visio Corporation. All rights reserved.
Socket Bolt
SOCK
Top view of hexagonal socket head set screw. Selection box represents thread diameter.
Vis_TME.chm!#25953 `7Copyright 1999 Visio Corporation. All rights reserved.
User.Sizing Prop.Diameter Height User.Diameter Set Dimensions... `"Input individual shape dimensions.
_Resize With Handles Use shape handles to resize. User.Sizing Prop.Diameter Height
Square.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_Sba.chm!#22417
Vis_TMH.chm!#24773 `7Copyright 1999 Visio Corporation. All rights reserved.
Place On Arc
Vis_TMH.chm!#24775 `7Copyright 1999 Visio Corporation. All rights reserved.
pwwp
Indicates North on a drawing. Rotate to proper orientation.
Vis_TMH.chm!#24719 `7Copyright 1999 Visio Corporation. All rights reserved.
ThePage!User.visNorthAngle
Use for Property Lines `9Use this North Arrow to set the angles for Property Lines Actions.Checked
sing meets and bounds measurements.
Vis_TMH.chm!#24721 `7Copyright 1999 Visio Corporation. All rights reserved.
Use for Property Lines Use for Property Lines Actions.Checked
Scale symbol with automatic numbering. Works best when stretched to multiples of 5 and 10.
Vis_TMH.chm!#24725 `7Copyright 1999 Visio Corporation. All rights reserved.
esc(5)
0.0 in.
0.6 in.
1.0 in.
2.0 in.
Hide Units
Show or hide display of units. User.ShowUnits Hide Units Show Units
0in.
0.6in.
1in.
2in.
Right-click to switch between 1st-angle- and 3rd-angle projection symbols.
symbol.
Annotate.hlp!#3201 `9Copyright © 1997 Visio Corporation. All rights reserved.
Scratch.B1 1st Angle Projection `1Configure shape to indicate 1st angle projection.
3rd Angle Projection `1Configure shape to indicate 3rd angle projection. Scratch.B1
Typical title block for small paper sizes.
size paper.
annotate.hlp!#2852 `9Copyright © 1996 Visio Corporation. All rights reserved.
Annotate.hlp!#3203 `9Copyright © 1997 Visio Corporation. All rights reserved.
Open For Editing... `5Open the title block's group window for easy editing.
Arrow with a 45-degree arrowhead.
45-degree arrowhead.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_Sba.chm!#22435
Line that extends beyond endpoint handles. Useful for creating shapes using the Fragment operation.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24800
Reposition Endpoint
Actions.Action Hide Control Handles Show Control Handles `1Hide the control handles at the ends of the line. `1Show the control handles at the ends of the line.
Hide Control Handles
Hide the control handles at the ends of the line.
Side view of threaded stud. Use control handles to adjust the hidden line portion of stud.
Vis_TME.chm!#25967 `7Copyright 1999 Visio Corporation. All rights reserved.
Hidden Line Location
Set Dimensions... `"Input individual shape dimensions. User.Siz Prop.Diam Prop.Len Prop.ThdLen Height User.Diam Width User.Len Controls.X1 User.ThdLen Controls.X2 Width-User.ThdLen
_Resize With Handles Use shape handles to resize. User.Siz Prop.Diam Height Prop.Len Width Prop.ThdLen abs(Controls.X1-controls.x2)
Input stud length. Stud Length
`'Input length of hidden section of stud. Hidden Length
Controls.X1 Controls.X1 `FLimit rangle of movement of control handle to within width-height box.
Shape hidden detail.
Controls.X2 Controls.X2 `FLimit rangle of movement of control handle to within width-height box.
12000# Pull Strength
Strength
Chamfered washer or spacer with adjustable inside and outside diameters and chamfer.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TME.chm!#25965
Set Dimensions... `"Input individual shape dimensions. User.Sizing Prop.Diam Prop.Diam2 Prop.Tk Height User.Diam Width User.Width Controls.Y1 User.DM Controls.Y3 User.AS
_Resize With Handles Use shape handles to resize. User.Sizing Prop.Diam Height*User.Doff Prop.Diam2 (Controls.Y1-Height/2)*2 Prop.Tk Width Prop.Cham User.Ang
Resize Chamfer Diameter
Chamfer Angle (degrees) Input chamfer angle.
Controls.Y3 Controls.Y3
Prop.Cham
Qps-8R
controls.y1
Q(-DT
Top view of hexagonal nut. Selection box represents thread diameter.
Vis_TME.chm!#25933 `7Copyright 1999 Visio Corporation. All rights reserved.
Set Dimensions... `"Input individual shape dimensions. User.Sizing Prop.Diameter Width User.Diameter
_Resize With Handles Use shape handles to resize. User.Sizing Prop.Diameter Width
`$Reposition Upper-Right of Crosshairs
back back
6000# Pull Strength
Dimensions Dimensions
Perpendicular lines with adjustable line lengths. Right-click to show/hide right angle box.
box.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24804
Resize Leg
Actions.Action Hide Right Angle Box Show Right Angle Box Show or hide right angle box.
Show Right Angle Box
Mount Mount
Vis_Sba.chm!#22430 `7Copyright 1999 Visio Corporation. All rights reserved.
Deck Deck
Circle defined by 3 points.
g 3 points.
red circle. Double-click to show alignment box.
t box.
ment box.
`7Copyright 1999 Visio Corporation. All rights reserved. Vis_TMH.chm!#24791
Reposition Perimeter Point
Actions.Action Hide Alignment Box Show Alignment Box Hide the alignment box. Show the alignment box.
Show Alignment Box
Show the alignment box.
Title Title
Davit Base Davit Base
temp temp
Hardware Hardware
@
Foot Block Mount End Template
?UUUUUU
Notations Notations
Fasteners Fasteners
TRUE `8To display the custom properties of the shape upon drop. Ask On Drop
0.625
0.000
?@wwwwww
Stbd Foot Block Installation
Microsoft Excel Worksheet Biff8 Excel.Sheet.8 Jeff Stander Jeff Stander Microsoft Excel Jeff Stander B "$"#,##0_);[Red]\("$"#,##0\) "$"#,##0.00_);[Red]\("$"#,##0.00\) "Yes";"Yes";"No" "True";"True";"False" "On";"On";"Off" Sheet1 Sheet2 Sheet3 JFIF FPhotoshop 3.0 8BIM 8BIM 8BIM x8BIM 8BIM 8BIM' 8BIM 8BIM 8BIM 8BIM 8BIM JFIF &File written by Adobe Photoshop Adobe 7GWgw AQaq" dEU6te '7GWgw VYFF>- Xmuu M\IN@ëÝ ct[k bQV5e RjgO XZ,f b>/Lu9C* JvRL NEucþ ÜkM]K v=W[u Wz(c ?atB H{MV{¶þ}nuo [amu4> 8BIM XICC_PROFILE HLino mntrRGB XYZ acspMS
IEC sRGB cprt 3desc lwtpt bkpt rXYZ gXYZ bXYZ dmnd pdmdd vued view $lumi meas $tech rTRC gTRC bTRC text Copyright (c) 1998 Hewlett-Packard Company desc sRGB IEC61966-2.1 sRGB IEC61966-2.1 XYZ ÌXYZ XYZ XYZ ÚXYZ Ïdesc IEC http://www.iec.ch IEC http://www.iec.ch desc .IEC 61966-2.1 Default RGB colour space - sRGB .IEC 61966-2.1 Default RGB colour space - sRGB desc ,Reference Viewing Condition in IEC61966-2.1 ,Reference Viewing Condition in IEC61966-2.1 view XYZ çmeas sig CRT curv A)AjA¬AîB0BrBµB÷C:C}CÀD EÞF"FgF«FðG5G{GÀH IðJ7J}JÄK KâL*LrL MÜN%NnN OÝP'PqP QæR1R|RÇS TÛU(UuUÂV WàX/X}X &File written by Adobe Photoshop Adobe DTsEF7Gc(UVW 8fóu*9:HIJXYZghijvwxyz T6Ed'
sƒ“FtÂÒâòUeuV7 ÅÕåõ(GWf8v†–¦¶ÆÖæögw‡—§·Ç×ç÷HXhxˆ˜¨¸ÈØèø9IYiy‰™©¹ÉÙéù*:JZjz SM=L 8kjQLT wf;b 0EKECEK AKGGK zle6 Koas %nS'WA yM[,N#* Vcbf P-<k>gq ufR9hij hs[R puqQ ~luf> wCtFb [Huz #Fbi au_Z RR&_u |g2qAN O/CQU O5EEDt VSE" 7egK| 0MCK oW<q náëqMS, giVjI*4 |vsmC! xLm~+f
E[UWM_< i2Us nH>>m KJX)E JFIF %&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz &'()*56789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz wb*K VaN| oc_\j^> qPks W=Ol bo-o &dk9as SEdo rMl^ fPT~ m^=CZe .Cawzn EKw)$q Cy:[Z o6lF M,H8H Hm7P2 MV[[D* QHaE GenC8O 9mnW `c du $nzy L6Vg iwZY
,AKE Dimensions Face Plate Dimensions Pull Strength (lbs.) Aftermarket Packaging* 5/16" dia. 7/16" dia. MbP?_ DINU" MbP?_ MbP?_ ANZUS Technology International' Sheet1 Sheet2 Sheet3 Worksheets _PID_HLINKS Drawing\~Page-8\Sht Arial "System Dimensions Pull Aftermarket Strength s (lbs.) Packaging* Arial Arial 5/16" dia.
7/16" dia. 7/16" dia. - Face Plate - Dimensions eet.1 NANI
Invisible Invisible
Stainless Stainless
5.14
5.99
2.57
5.77
1.125
2.000
5.250
6.000
I@pT
Starboard Foot Block Mount
2.25
3.92
4.38
3.25
0.75
7.50
3.75
6.50
-0.25
0.3125
0.0000
OvV^
` @UUUUU
17.0°
7.00
Back Back
Stbd Foot Block Mount View "A"
2.125
0IN
.Inches
2.375
4.500
7.500
1.188
1.0625
1.3750
C:\Program Files\Visio\Solutions\Annotation\Annotations.vss
C:\Program Files\Visio\Solutions\Block Diagram\Basic Shapes.vss
C:\usr\SVBeatrix\design\Deck Gear.vss
C:\Program Files\Visio\Solutions\Annotation\Dimensioning - Engineering.vss
C:\Program Files\Visio\Solutions\Annotation\Drawing Tool Shapes.vss
C:\Program Files\Visio\Solutions\Boat Electrics\Ee - Fundamental Items.vss
C:\Program Files\Visio\Solutions\Boat Electrics\EE - Switches and Relays.vss
C:\Program Files\Visio\Solutions\Mechanical Engineering\Fasteners 1.vss
C:\Program Files\Visio\Solutions\Mechanical Engineering\Fasteners 2.vss
C:\Program Files\Visio\Solutions\Annotation\Title Blocks.vss
Guide
TheDoc
CONTINUOUS
Gesture Format
Frame
AntiScale
Basic
Visio 00
Rectangle
Dimension
Horizontal
LPrec
LUnits
ShowUnits
Extensions
Angle
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
Horizontal outside
Vertical
Basic Shadow
Visio 02
3-D box
ScaleFactor
EE Normal
Fastener
Angle even
APrec
AUnits
AUnitsFactor
AngleText
APFString
APrecInd
APrecVal
AUnitsInd
AUnitsVal
Hairline
Arc - graphical
Arc - numeric
Block
Block label left
Title
BoxType
SizeFactor
Circle
Page#
Section header
Date
Scale
RatioLeft
RatioRight
PageScale
DrawingScale
Drawn by
Block - side label
Vertical outside
Hidden detail
Threads
Scale.18
Rectangle.119
Rectangle.121
Circle.29
Callout
Harken B56ST-S
Hex jam nut
AskOnDrop
Diameter
ParHeight
Detail
SetOnDrop
Sizing
Raised ck. (slotted)
ThreadLen
MinLen
TLen
CHLimit
Callout - straight
Countersunk (slotted)
Hex nut
Washer
Diam
Diam2
Width
Doff
Single-coil washer
Group
Rectangle.43
Frame.31
Revisions block
Drawing scale
ScaleType
ArchLeft
CivERight
MetricLeft
MetricRight
MELeft
Page#.34
Harken 2114 Footblock Front.44
Harken 2114 Footblock Front .44
Vertical baseline
Rectangle.37
Sector - numeric
Circle - diameter
Circle, ellipse
Radius
Arc radius
Length2
Centerline
Harken 2114 Footblock Front
Harken 2114 Footblock Front Vie
Length3
Length4
LengthText2
LengthText3
LengthText4
FeetInch2
FeetInch3
FeetInch4
Feet2
Feet3
Feet4
Inch2
Inch3
Inch4
TextAng
Aligned even
Black fill
Section 1
Reference plane
TextAngle
TextSize
ShowEnds
Break line
ZigZagSize
Section 2
Callout - bent
Callout - bent.46
Special characters
AutoWidth
WidthIncrement
Frame.67
Hex socket
Turning Block Installation
Single-coil washer.60
Rounded rectangle
Hex head
Washer.62
Washer.95
Angle uneven
Horizontal.28
Circle.22
Circle.24
Circle.25
Horizontal baseline
Diameter outside
Box callout
Line with extensions.66
627 Padeye Top
Padeye Top
Centerline.26
Washer.99
Hex head.113
Centerline.18
Centerline.19
Hex nut.128
Centerline.20
Hex set top
Hex Bolt
Hex set top.40
Hex set top.44
Circle.50
Countersunk (posidriv)
Radius.54
Centerline.12
Centerline.13
Schaeffer 5/16" U-Bolt T.94
Centerline.24
Line with extensions.67
Rectangle.52
Circle: 3pt.
Square
North arrow 3
Rectangle.39
Countersunk (posidriv).5
Hex nut.32
Single-coil washer.36
Harken Footblock E
Countersunk (posidriv).65
Hex nut.70
Single-coil washer.74
Hex nut.53
visNorthAngle
Starboard Foot Block 2
Horizontal outside.65
visSetNorthAngle
Radius outside
North arrow 5
Scale symbol
Line with extensions
Stud
Text0
Text3
Text5
Text10
Horizontal outside.98
Projection symbol
Block label center
Title block small
Washer.163
45 degree single
ThdLen
Len1
Hex Bolt.82
45 degree single.63
Len2
CH1Limit
CH2Limit
Thdlen1
DimCen
Centerline.93
Schaeffer 5/16" U-Bolt T
Scale.2
Centerline.53
Horizontal.59
Vertical.60
Schaeffer 9/16 U-Bolt
Page#.5
45 degree single.62
Schaeffer 9/16 U-Bolt Side
Schaeffer 9/16 U-Bolt.85
Washer (chamfer)
Cham
CHLimit3
Act2
SetAng
CHLimit1
WLimit
Chamfer
Circle.17
Horizontal.36
Rectangle.19
Schaeffer 9/16 U-Bolt End
Hex nut top
Centerline.2
Centerline.21
Schaeffer 9/16 U-Bolt Side.89
Schaeffer 9/16 U-Bolt.89
Schaeffer 9/16 U-Bolt End.90
Centerline.45
Stbd Foot Block Mount View "A"3
Countersunk (posidriv).45
Centerline.92
Vertical.94
Schaeffer 5/16 U-Bolt S
Schaeffer 5/16 U-Bolt
Perpendicular lines
Single-coil washer.57
Rectangle.137
Radius.2
Deck_Har
dware1
rstdo
WINNT\sy
stem32\
2.tlb#OL
E Automa
tion
ThisDocu
mentG
Attribut
e VB_Nam
e = "Thi
sDocumen
|Global
Spac
dCreat
Pred
ecla
BExpo
Templ
ateDeriv
Bustomi
Visio
Win16
Win32
VBA6
Deck_Hardware1N
stdole
ThisDocument<
_Evaluate
Documentj
ID="{832D354B-79B2-4BAD-8453-168EA540C721}"
Document=ThisDocument/&H00000000
Name="Deck_Hardware1"
HelpContextID="0"
VersionCompatible32="393222000"
CMG="1210AB88E88CE88CE88CE88C"
DPB="5351EA4B2A4C2A4C2A"
GC="94962D0E2F4E304E30B1"
[Host Extender Info]
&H00000001={3832D640-CF90-11CF-8E43-00A0C911005A};VBE;&H00000000
ThisDocument